How do you know what condition the water in your process actually has?
In many processes, it remains unclear what is happening inside the molds.
It is not enough to measure the mold wall temperature or just look at the total flow rate.
The consequences can be dramatic if cooling circuits become blocked.
the result
uneven mold temperature and therefore fluctuating component quality
longer cycle times and therefore rising production costs
higher energy costs and therefore rising production costs
no documentation and therefore missing traceability in the process
digital temperature & flow monitoring
With orcinus, you have complete control over the temperature control of your molds. Based on the principle of parallel distribution, in which each cooling circuit receives the same flow rate and flow temperature, the return flows are precisely monitored and documented.
Digital sensors detect variances immediately. They ensure consistent component quality, reduce waste, and save energy.
your benefits
cycle time
reduction
process
optimization
quality
improvement
orcinus orca
Maintenance-free temperature control system with dual ultrasonic measurement for precise measurements.
- maintenance-free & vibration-resistant
- compressed air & acid no problem
- optional up to 120 °C (248 °F) or 180 °C (356 °F)
- flow measurement from 0,5 l/min (0,13 gal/min) or by arrangement
orcinus plus
orcinus orca and orcinus smartshark as adjustable plus version with integrated control valve.
- one control valve per cooling circuit for individual control
- two options: flow control or delta-T control
- orcinus orca plus for temperatures up to 160 °C (320 °F)
- orcinus smartshark plus for temperatures up to 100 °C (212 °F)
orcinus smartshark
compact temperature control solution with vortex measurement for applications with limited installation space.
- temperature range up to 100 °C (212 °F)
- 0,5 – 10 l/min
(0,13 – 2,64 gal/min) or - 0,9 – 15 l/min
(0,24 – 3,96 gal/min) or - 1 – 32 l/min
(0,26 – 8,45 gal/min)
What our customers say…
“
We chose the orcinus temperature control system to be able to reliably monitor series processes. It also enables us to guarantee the highest component quality.
Mathias Larverseder
Kunststofftechnik KRUG GmbH
“
The key factors for us in choosing the orcinus system were efficiency and cost reduction, cycle time optimization, the high quality that the system offers, maintenance-free ultrasonic sensors, and, of course, price-performance ratio.
Lars Zosel
plastic concept GmbH